btsr SMART KTF 2000 - Yarn Measurement and Learning Functions

SMART KTF 2000 – KTF/100HP Operation
SMART KTF 2000 3A-39
TENS - Reading the Programmed/Measured yarn Tension value on KTF/100HP
MEASUR



TENS
This function allows you to compare the yarn tension value Programmed on a
KTF/100HP device (MAIN TENSION), with the value actually Measured on the
device itself.
When you activate this function, a real time data exchange with the selected KTF
device occurs; this condition is signaled by the flashing of
OK and COM labels on
the relevant device.
From the MEASUR menu, press
until the >TENS menu option is selected.
At this point, press
to access the function.
NN indicates the number of KTF device, selectable using
, .
PPP indicates the Tension Value programmed on the device (
MAIN * TENSION-P1).
MMM indicates the Tension actually Measured (mean value of selected
KTF/100HP displays).
This screen indicates that a communication error occurred with the NN device.
Press once
to leave the function and return to the MEASUR Menu, or twice
to return to Main Menu.