btsr SMART KTF 2000 - KEY_LR Setting the LEARN Function Access Keycode

SMART KTF 2000 – KTF/100HP Operation
3A-20 SMART KTF 2000
KEY_LR Setting the LEARN function access Keycode
SETUP



CONFIG



KEY_LR
This function allows the setup of a secret code (Keycode) to access the LEARN
function (CONTROL Menu). In this way non-authorized personnel are prevented
from accessing the function.
 This function appears only if the selected application is SOCKS, C-KNIT, F-
KNIT or BODY-S.
Once you have selected the > KEY_LR CONFIG screen, press
to access the
function.
Enter the code of your choice (1 to 7 alphanumeric characters) using the following
buttons:
: Increases the character pointed by the cursor.
: Decreases the character pointed by the cursor.
: Moves the cursor one position right.
: Confirms and saves the code which has been set.
 If no code is entered, the function is disabled and you will not be asked for an
access code when entering the LEARN function.
Press once
to exit the function, or twice to return to the Main Menu.
WARNING: If you set a password (Keycode) you will have to enter it
each time you access the LEARN function. If you forget the access
code it will be necessary to contact your BTSR reseller.