SMART KTF 2000 – KTF/RW Operation
3B-10 - SMART KTF 2000
Functions Available within the CONTROL Environment
(Counter Reading)
ErT = Number of “Tension” errors detected
E2 = Number of “E2” errors detected (see KTF/RW Manual, Chapter 4 for details)
E3 = Number of “E3” errors detected (see KTF/RW Manual, Chapter 4 for details)
ETg = Number of “Target” errors detected
The Counter Reading function can be activated only if it was enabled in the APPLIC menu item. (CNT Alm).
Main Menu
System Monitoring
Increase the device
number DDD
Decrease the device
number DDD
Displaying the fault
counters-total
Displaying the fault counters
on individual Devices
Clearing all counters Clearing counters
relating to KTF DDD
To Next Page
Loading...
