Overview
WEENDINGFEEDER - 1.3 -
Advantages obtained by using the WINDINGFEEDER devices
Constant yarn tension both when the machine speed changes and when the yarn
packages gradually get empty.
Best efficiency by eliminating the yarn breakage (tears and extratensions), and
possibility of working at the highest speed offered by the machine.
Possibility of working with a wide range of yarn types.
Accurate yarn feeding speed measurement (1 to 2,500 m/min) – (LFA m/min = Length
of Absorbed Yarn).
Possibility of using the yarn up to the complete package emptying.
Better machine efficiency.
Possibility of finding the best application conditions of WINDINGFEEDER device:
(No of coils to be wound around the roller, ideal programming values for parameters
etc), thanks to the continuous visualization, in graphic form, of both average and peak
values of yarn tension.
Possibility of handling up to a maximum of 16 sensors of the IS3x/TS series, for
doubling machine applications where more than one yarn must be simultaneously fed
(by means of WINDINGFEEDER) and controlled (by means of IS3x/TS).
To Next Page
Loading...
