Gemini Series Electroporator User’s Manual
toll free 800.272.2775 • 508.893.8999 • www.btxonline.com
2
Safety Information
Please read the following safety precautions to ensure proper
use of your generator. If the equipment is used in a manner not
specified, the protection provided by the equipment may be
impaired.
To Prevent Hazard or Injury
Use Proper Line Cord
Use only the specified line cord for this product and make sure line
cord is certified for country of use.The operating voltage range for
the BTX Gemini Twin Wave Series is 100-240 vac, 50-60 Hz.
Ground the Product
This product is grounded through the grounding conductor
of the power cord. To avoid electric shock, the grounding
conductor must be connected to earth ground. Before making
any connections to the input or output terminals of the product,
ensure that the product is properly grounded.
Make Proper Connections
Make sure all connections are made properly and securely. Any
signal wire connections to the unit must be no longer than 3
meters.
Observe All Terminal Ratings
Review the operating manual to learn the ratings on all
connections.
Use Proper Fuse
Use only specified fuses with product.
Avoid Exposed Circuitry
Do not touch any electronic circuitry inside of the product.
Do Not Operate with Suspected Failures
If damage is suspected on or to the product do not operate the
product. Contact qualified service personnel to perform inspection.
Orient the Equipment Properly
Do not orient the equipment so that it is difficult to operate the
disconnection device.
Place Product in Proper Environment
Review the operating manual for guidelines for proper operating
environments.
Observe All Warning Labels on Product
Read all labels on product to ensure proper usage.
Caution Risk of
Electric Shock
Caution
Protective Ground
Terminal
High Voltage Risk
To Next Page
Loading...
