BTX Gemini X2 - Upload Log Files; Protocol Manager Software

Gemini Series Electroporator User’s Manual
toll free 800.272.2775 • 508.893.8999 • www.btxonline.com
35
✐
NOTE: Files should be backed up periodically. The generator’s
SD card can store up to approximately 100,000 les.
Protocol Manager Software
Upload Log Files
1. On the main screen, click ‘Pulse Data’
2. Select your desired files or folders and then click ‘Transfer’.
3. Select the drive or folder location.
Troubleshooting Protocol Manager
1. Do not upload/download Protocols while generator is
running. Program works best while generator is idle on
Protocol setup screen.
2. Order of Operations:
A. Connect USB.
B. Turn generator on.
C. Start Protocol Manager program.
✐
NOTE: Log Files are saved as a tab delimited text le. They
can be opened with any common text editor like Notepad or by
using spreadsheet software such as Excel.