Buderus Logamatic 4323 - Page 23

Standard functions
6
Logamatic 4323 - Subject to technical modifications.
23
6.4.2 For the operating mode not currently active
You may also adjust the room temperature for an operating mode that is
currently inactive.
For example, you are currently in automatic day mode and would like to alter
the
set night temperature.
Hold down "Night mode", and select the required night room temperature with
the rotary selector (here: "16°C").
Release the "Night mode" key.
The selected night temperature is now set to 16 °C. The selected permanent
display will then appear again.
Press "AUT".
The "AUT" LED illuminates; automatic mode is active again.
+
Set room
Constant night
16°C
AUT
USER NOTE
If you are currently in automatic night mode, and you wish to adjust
the
day mode, proceed as described above, but instead hold down
the
"Day mode" key.