EasyManua.ls Logo

Buffalo WCR-GN - Appendix B Default Configuration Settings

Buffalo WCR-GN
109 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WCR-GN User Manual 91
Appendix B
Default Conguration Settings
Feature Parameter Default Setting
Internet
(Router Mode only)
MethodofAcquiringIPAddress PerformEasySetup(InternetConnectionWizard)
Default Gateway none
Address of DNS Name Server none
InternetMACAddress UseDefaultMACAddress
MTUSizeofInternetPort 1500 Bytes
PPPoE
(Router Mode only)
NameofConnection none
User Name none
Password none
Service Name none
ConnectionType ConnectiononDemand
Automatic disconnection (DisconnectCondition)
When both incoming and outgoing trac stops
(Disconnect Time)
5 Minutes
Authorization Automatic Authorization
MTU Size 1454 Bytes
MRU size 1454 Bytes
KeepAlive Enable
DDNS
(Router Mode only)
Dynamic DNS Service Disable
CurrentDynamicDNSInformation none
LAN LANSideIPAddress Router Mode:
192.168.11.1(255.255.255.0)
Bridge Mode
192.168.11.100(255.255.255.0)
DHCPServerFunction
(Router Mode only)
Enable
DHCPIPAddressPool
(Router Mode only)
192.168.11.2forupto64Addresses
LeasePeriod
(
Router Mode only)
48hours

Table of Contents