Buffalo WCR-GN - Windows XP TCP;IP Configuration

WCR-GN User Manual 98
Appendix C TCP/IP Settings in Windows
1
ClickStart>Settings>Control Panel.
2
Doubleclick“Network”.
3
Rightclickon“Local Area Connection”,thenclick“Properties”.
4
Select“Internet Protocol (TCP/IP)”,thenclick“Properties”.
5
Select“Obtain an IP address automatically”and“Obtain DNS server address
automatically”,andthenclick“OK” in normal situations.
 IfyouxtheIPaddress,enterthevalueasnecessary.
 ex) Iftherouter'sIPaddressis192.168.11.1;
   IPaddress 192.168.11.80
Subnet mask 255.255.255.0
Default gateway blank
Preferred DNS server blank
Alternate DNS server blank
6
Click“Close”.
Windows XP
ToperformthesettingsforWindowsXP,followtheprocedurebelow.