Put back all tools as they were stored in the jack
storage compartment and put the compartment cover
back on.
To put the cover back on, slip the tabs on the side
01
the cover into the cover opening. Push the cover
in place and push down the tabs on the cover
so
that it
rests in the groove. This secures the cover
in
place.
When you replace the compact spare with a full-size tire,
reinstall the bolt-on wheel covers or the center cap,
which ever your vehicle has. Tighten them “hand tight”
over the wheel nuts, using the folding wrench.
Storing the Flat Tire (Vehicles without the
Stowable Seat and without the Rear
Convenience Center)
I
I
I
,B
A.
D-Ring
B.
Wing Nut
c.
J-HOOK
D.
Valve Stem
E.
Full-Size Tire
5-8
1
To Next Page
Loading...
Need help?
General
