33
Operating and functions
UNit Lit/sEC
Lit/miN
Lit/h
m3/miN
m3/h
0......9
Us GAL/s
Us GAL/m
Us GAL/h
imP GA/s
imP GA/m
GA/h
FLOw
tOtAL
0......9
REtURN
AUtO
DEC Pt 3
DEC Pt 2
DEC Pt 1
DEC Pt 0
0......9
LitRE
m3
0......9
→ Choose the flow rate
unit.
→ Confirm
If the chosen unit is in litres or m
3
.
If the chosen
unit is in
gallons.
→ Choose the
number of decimal
positions.
→ Confirm
→ Choose the totalizer unit..
→ Confirm
Fig. 28: Diagram of the "UNIT" parameter of the Parameters menu
→ If you do not want to adjust another parameter, go to the "END" parameter of the Parameters menu and press
ENTER
to save the settings or not and go back to the Process level.
English
Type 8045
To Next Page
Loading...
