Burkert 8045 - Setting the Brightness of the Display and How Long It Stays ON, or Deactivating the Backlight

52
Operating and functions
8.6.17. Setting the brightness of the display and how long it stays
ON, or deactivating the backlight
This parameter makes it possible:
• to adjust the brightness of the display and how long the display is backlit after a key press.
• to deactivate the backlight.
BACKLit BKLG= 1
END
→ Set the display brightness, from 1 to 9.
BKLG= 9
BKLG OFF
0......9
→ Or, deactivate the backlight.
→ Confirm
DELAY= 30
→ Set the duration the display is backlit after a key press
(00 s: the display is constantly backlit).
→ Confirm
END
Fig. 53: Diagram of the "BACKLIT" parameter of the Parameters menu
→ If you do not want to adjust another parameter, confirm the "END" parameter to save the settings or not and
go back to the Process level.
English
Type 8045