Burkert 8045 - Page 48

44
Operating and functions
OUtPUt DO2 hYstEREs.
DO3
2-= 0.000
2+= 0.000
→ Enter a flow rate value
1)
, associated to the high
threshold, in the unit chosen in the "UNIT" parameter.
→ Confirm.
wiNDOw
→ Enter a flow rate value
1)
, associated to the low
threshold, in the unit chosen in the "UNIT" parameter.
→ Confirm.
iNV YEs
iNV NO
0......9
→ Choose the operating, inverted or not inverted, of the
relay output.
DEL. 2= 00
→ Enter the time delay before switching value (value
between 0 and 99 s).
→ Confirm.
1)
If hysteresis switching: Value set for 2- ≤ 2+ or 3- ≤ 3+ . If window switching: Value set for 2- <2+ or 3- <3+.
Fig. 40: Configuration of the DO2 or DO3 relay output with switching thresholds
English
Type 8045