Burmester Classic 101 - BURLINK (Burmester LINK Connection); Connectors; Commands

BURLINK (BURMESTER LINK CONNECTION)
101 Integrated Amplifier
23
BURLINK (BUR LINK C)
Connectors
The BURLINK interface can be operated via the 9-pin D-SUB socket (RS-232) (14).
RS-232 configuration:
• 9600baud
• 8bits
• Parity: none
• 1stop bit
• No hardware handshake
Commands
The commands for operating the 101integrated amplifier are listed below. They must
be sent in upper-case letters and each command must be concluded with a carriage
return (\r).
Command Meaning
POWON\r Switches the device on
POWOFF\r Switches the device into standby mode
INP+\r Switches through the inputs successively
INP-\r Switches through the inputs successively
INP1\r Activates the input TV
INP2\r Activates the input AUX 1
INP3\r Activates the input AUX 2 / SURR
INP4\r Activates the input TUNER
INP5\r Activates the input CD
SMOOTH_OFF\r Inactivates the Smooth function
SMOOTH_ON\r Activates the Smooth function
VOLUP\r Increases the volume by one level
VOLDN\r Reduces the volume by one level
DIM0\r Turns on the display
DIM3\r Turns off the display
DEFAULT\r Delivery state
PREONLY_OFF\r Switches off the pre-out only mode
PREONLY_ON\r Switches on the pre-out only mode
SNR\r Indicates the series number of the device
VERSION\r Indicates the software version
TYPE\r Indicates the device type