UNPACKING AND SETTING UP THE DEVICE
101 Integrated Amplifier
9
U S U D
CAUTION
Heavy device
The device is very heavy and may cause injury if it falls.
►
The device should only be unpacked and set up by individuals who are
experienced in handling heavy loads.
►
Allow a second person to help you during unpacking and set-up if need be.
►
Pay attention to any possible sharp edges.
Unpacking
►
Please make sure that the items supplied are all present and complete.
Should parts be missing or should you detect damage while unpacking the device,
please do not connect it. Instead, contact your authorized specialist dealer.
Supplied items
The items supplied include:
• 1 package with the 101 integrated amplifier
• 1 power cord
• 4 jack to RCA input adapters, mono
• 1 067remote control
• 1 set of operating instructions
• 1 set of warranty documents
Packaging
We recommend saving the original packaging for transportation,
such as relocation, etc.
Set-up
An operating temperature that is too low or too high may lead to errors in the device.
For this reason, after unpacking the device, leave it standing for some time before
connecting it and turning it on.
Carefully remove the device from the transportation packaging and place it in a
suitable location. When selecting a location for set-up, ensure sufficient ventilation and
avoid direct sunlight, dust, and humidity to protect the device from overheating.
Make sure that the set-up location is stable enough to support the weight of the device.
Slots and openings on the device serve as a means of ventilation. They must not be
covered by magazines, tablecloths, curtains, etc.
When operating the device in extremely warm environments, additional ventilation
must also be ensured. Avoid operating the device in extremely humid environments,
for example in a bathroom.
The IR receiver receives the signals from the remote control and should not be covered
by objects.
To Next Page
Loading...
