Digital Ref Level: Set to the reference level of your facility, as above. For example, if
you run your digital mixing desk so that it peaks at -10dBfs, set this to
-10dBfs.
The V3 transmitter features a 4-band audio processor built in as standard.
The processor takes its input from the Digital or analog input connectors.
The following items allow setup of the processor:
Audio Processor: on/off.
When off, the processor is bypassed – use this setting if feeding
audio to the V3 transmitter from an external audio processor. If
you’re using the optional internal tuner with the V3 transmitter
configured as a translator or rebroadcaster, you will probably want
to bypass the audio processor, because presumably the receive
audio is already processed.
Preemphasis: off/50/75uS – this affects the stereo generator’s pre-emphasis, and
that of the pre-emphasised limiting employed in the audio
processor. Set to suit that used in your part of the world; generally
75uS in the US and 50uS rest of world.
Processing Preset: Allows selection of one of the presets. Those available are:
Bypass
AC
CHR
Tight
Hot
Loud
Smooth
Clean
Bright
Rock ‘n’ Roll
Low Bass
Urban
Talk
Classic Bright
Classic Bright 2
The presets have been designed to represent processing texture
appropriate to the format after which they are named; However
don’t be afraid to use a differently-named preset to your format, if
it sounds better!
The content and function of the presets is similar to those used in
the BW audio processor DSPXmini Encore. Please refer to the
manual for that product for a fuller description of audio processing
techniques and applications.
Audio Mode: Stereo / Mono L+R / Mono L / Mono R / Swap L/R.
To Next Page
Loading...
