Motor coolant temperature too-high warning indicator
If this warning lamp keeps on, it indicates over-high motor coolant temperature. Please
stop the vehicle to cool down.
Steering system malfunction indicator lamp
■ When the power switch is at “OK”, this warning lamp turns on. If the steering system
works normally, this warning lamp turns off after several seconds.
■ When the steering system is malfunctioned, this warning lamp keeps on. It’s
recommended to drive the vehicle to a BYD Auto Authorized Service Station for
checking.
Tip
● The steering system uses a motor to reduce the force required to rotate the steering
wheel.
● When turning the steering wheel, the sound of the motor operation (“Buzzing”) will
be sent. The does not mean a fault.
● Do not rotate the steering wheel to any limit position and hold for
＜
5s, otherwise
the temperature protection will be activated to result in heavy steering or damage.
■ During the frequent in-situ rotation of steering wheel for a long time, the malfunction
indicator lamp of steering system doesn’t turn on, but the heavy steering can be felt.
This is not a malfunction mode.
● The frequent in-situ rotation of steering wheel for a long time will mitigate the
assisting performance of steering to prevent system overheating, which will result
in heavy rotation of steering wheel. In event of such situation, avoid the frequent
rotation of steering wheel or stop the vehicle. The system will restore normal
within 10min.
Warning
● If the malfunction indicator lamp of the steering system turns on, please immediately
park the vehicle in a safe place. It’s recommended to contact a BYD Auto Authorized
Service Station.
Power system fault warning indicator
■ If the power system is fault, the warning indicator will be turned on.
■ In any of the following cases, it indicates that a component monitored with the warning
indicator system is faulty, it is recommended to contact BYD Auto Authorized Service
Station for inspection as soon as possible.
To Next Page
Loading...
