4
Use and drive
4 -1 Charging and discharging descriptions
2. Charging operation instructions
Use the seven-to-seven adapter to connect the vehicle to an AC charging pile or use the
charger of an AC charging pile/box to connect the vehicle to the AC charging pile/box to
realize AC charging.
Instant charge method:
■ Open the charging coupler cap and the charging coupler protective flap.
● With reference to the household portable AC charging, open the charging coupler
cap and charging coupler protective flap.
■ Connection of power supply coupler:
● This step is omitted while using the charging box attached in the vehicle to charge
the vehicle.
● This step is omitted when an AC charging pile is used and the charging pile is
provided with a charger；
● The use of seven-to-seven adapter is required when a single-phase AC charging
pile is used and the charging pile is not provided with a charger. During use,
connect the power plug to the power socket on the charging pile.
■ Connection of vehicle coupler:
● Connect the charger of the charging device to the vehicle charging coupler and
lock reliably.
Tip
● Do not forcibly insert the charger when the electric lock is under locked status.
■ Charging setting:
● This step can be omitted for the single-phase AC charging box attached in the
vehicle or for an AC charging pile without setting options in a public place.
● For an AC charging pile/box with setting options in a public place that requires the
swiping of card or the scanning of QR code, please refer to the operation
instructions of the charging pile/box for detailed operations.
■ The charging connection indicator lamp
on the combination instrument turns on.
■ During charge process, the relevant charge parameters and the charge image will be
displayed on the dashboard at the same time;
● In such case, the reserved charging can be set up on the instrument. For detailed
setup procedure, refer to reserved charging functional setting on the combination
instrument.
To Next Page
Loading...
