EasyManua.ls Logo

BYD e2 - Page 97

BYD e2
220 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
96
4 -1 Charging and discharging descriptions
Tip
The reserved charging function can’t be used when the battery power level is low.
3. Operation instructions for stop of charging
End of charging:
End the charging in advance by the setting of charging equipment or automatically
end the charging after the power battery is fully charged.
Disconnection of charging coupler:
Disconnect the charging coupler, with reference to the household portable AC
charging.
Disconnection of power plug:
If the seven-to-seven adapter is used, it’s recommended to firstly unplug the
charger and then unplug the power plug.
This step is omitted while using the charging box attached in the vehicle to charge
the vehicle.
This step is omitted when an AC charging pile is used and the charging pile is
provided with a charger.
Close the AC charging coupler protective flap and vehicle charging coupler cap (With
reference to household portable AC charging).
Collect the charge device and place it in the appropriate place;
If an AC charging pile/box is used, please place the charger to the designated
position of charging pile/box.
If the seven-to-seven adapter is used, clean up and preserve it properly.
Warning
It’s prohibited to fall off the seven-to-seven adapter or directly pull the cables for
movement of this equipment. Handle with care during movement. After use, please
store the equipment in a cool place.
Charge post DC charge
1. Equipment description
Use a DC charging pile in a public place to charge the vehicle. This charging pile is
generally installed in specific charging station.

Table of Contents

Related product manuals