BYK wave-scan 3 dual User Manual

8 | Configuration BYK-Gardner GmbH
46 wave-scan 3 / wave-scan 3 dual 301 200 085 E 2403
The configuration screen consists of an upper and a lower part. You can slide the screen to the
bottom and back to the top to view the options available.
1
2
3
4
5
6
7
8
9
10
11
12
These options have following meaning.
1 Measurement Parameters: Check
and change the default settings, see
Measurement Parameters [}47].
2 WiFi: Establish a wireless connection,
see WiFi Connection [}52].
3 Language: Set instrument language
here.
4 Date / time: Set system time, time
zone and daylight-saving time here.
5 Color scheme: Adjust screen bright-
ness to day and night conditions here.
6 Information: Shows system, network,
and legal information, see System In-
formation [}54].
7 Sound: Activate or deactivate the in-
ternal beeper here; useful for pass-fail
measurements.
8 Display time: Define the interval for
automatic shutdown here, see Display
Time [}55].
9 Checking tiles: Add these tile(s) to the
list of standards in the system memory,
see Checking Tiles [}55].
10 Factory reset: Reset instrument to fac-
tory settings here, see Factory Reset
[}56].
11 Protect configuration: Password is re-
quired to open the configuration
screen, see Protect Configuration
[}57].
12 Shutdown: Perform manually switch
off to safe battery power or replace
battery pack here, see Shutdown
[}58].

BYK wave-scan 3 dual Specifications

General

Brand	BYK
Model	wave-scan 3 dual
Category	Measuring Instruments
Language	English