EasyManuals Logo

BYK wave-scan 3 dual User Manual

Default Icon
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
1 | Introduction BYK-Gardner GmbH
6 wave-scan 3 / wave-scan 3 dual 301 200 085 E 2403
1.1 For Your Safety
Before operating the instrument the first time, please read the operating instructions and take
particular notice of the safety instructions. If you use the instrument and the accessories prop-
erly, there are no hazards to fear.
This product is equipped with safety features. Nevertheless, read the safety instructions carefully
and use the product only as described in these instructions to avoid accidental injury or damage.
No claims of product liability or warranty can be honored if the device is not operated in accor-
dance with the operating instructions.
1.1.1 Meaning of the Symbols
Throughout this document the following symbols and terms are used.
WARNING
This symbol warns of the danger of injuries. The term WARNING warns of severe injuries and
material damage. Different symbols can be used - if applicable.
CAUTION
This symbol warns of the danger of injuries. The term CAUTION warns of slight injuries or dam-
age. Different symbols can be used - if applicable.
NOTICE
This symbol points out additional information - which can be important for the operation of the
instrument.
1.1.2 Warning - Possibility of Injuries
CAUTION: Familiarization with safety instructions is necessary
Absence of knowledge of safety instructions threatens your health and can damage the instru-
ment. Read the safety instructions before you use the instrument the first time.
The safety instructions are part of the delivery content. You find the safety instructions in the
dedicated booklet enclosed to the instrument carrying case.
The safety instructions also include information about disposal, liability, and copyright.
WARNING: Injuries possible due to defects and extraordinary loads
If safe operation can no longer be presumed, shut down the device and secure it against unin-
tended operation.
The device must be presumed unsafe to operate:
If visible damage is evident,
if the instrument is no longer working,
if it has been stored for long periods under adverse conditions or
after harsh treatment during shipping.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the BYK wave-scan 3 dual and is the answer not in the manual?

BYK wave-scan 3 dual Specifications

General IconGeneral
BrandBYK
Modelwave-scan 3 dual
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals