To Next Page

To Previous Page

BYK-Gardner GmbH Introduction | 1

301 200 141 E 2401 wave-scan 3 ROBOTIC 5

1 Introduction

This instruction manual is an important part of this instrument. It contains essential

information about setting up, placing in service and use. If you pass the device on

to another user, please ensure that the instruction manual is included with the in-

strument. The manual must be studied carefully before working with the equip-

ment. Please contact your regional service office if you have any questions or re-

quire additional information about the device.

The technology and fittings are based on state-of-the art optic and electronic tech-

nology. New developments and innovations are constantly being integrated into

the equipment. Thus, the diagrams, dimensions, and technical data used in this

manual may have changed as a result of adapting the device to new information

and improvements.

No portion of the software, documentation or other accompanying materials may

be translated, modified, reproduced, copied or otherwise duplicated (with the ex-

ception of a backup copy), or distributed to a third party, without prior written au-

thorization from BYK-Gardner GmbH. In any case, this requires the prior written

consent of BYK-Gardner.

BYK-Gardner GmbH offers no guarantee that the software will function without

error or that the functions incorporated therein can be executed in all applications

and combinations selected by you.

No liability other than as provided by law is assumed for direct or indirect damage

sustained in association with the use of the instrument, the software or documen-

tation.

BYK-Gardner GmbH reserves the right to update the software and written docu-

mentation without prior notice.

BYK wave-scan 3 Operating Manual

Other manuals for BYK wave-scan 3