BYK wave-scan 3 Operating Manual

1 | Introduction BYK-Gardner GmbH
8 wave-scan 3 ROBOTIC 301 200 141 E 2401
1.2 Declaration of Conformity
We,
BYK-Gardner GmbH
Lausitzer Strasse 8
D-82538 Geretsried
declare, that this instrument complies with the requirements of the following EU
directives:
• 2014/30/EU - Electromagnetic Compatibility
• 2014/35/EU - Low Voltage
The following harmonized standards were applied:
• EN 60825-1:2007
• EN 61010-1:2010
• EN 61326-1:2013
Geretsried, November 13, 2019
Frank R. Wagner
Managing Director
1.3 Handling Instructions
The measurement unit contains sensitive precision optical and electronic parts. Do
not drop it and protect it from being bumped or jostled!
Do not hold the unit by the measurement aperture or allow any foreign objects to
get into this opening.
Do not expose the unit to direct sunlight for extended periods of time. Do not
store it in a hot or dusty environment. The case that comes with the unit offers the
best protection when the unit is being stored.
Avoid prolonged exposure to high relative humidity and do not allow water to
form from condensation, see Technical Data [}31].
Protect the measuring unit from moisture, chemicals and corrosive vapors.
1.4 Prerequisites
In order to operate the instrument basic understanding of following topics is rec-
ommended:
• Instrument wave-scan 3 / 3 dual for manual measurements (option)
• Software smart-process to monitor the measurement results
• Software smart-robotic to configure and control the device

BYK wave-scan 3 Specifications

General

Brand	BYK
Model	wave-scan 3
Category	Measuring Instruments
Language	English