BYK wave-scan 3 - Using the Main Menu

3 | Getting Started BYK-Gardner GmbH
22 wave-scan 3 / wave-scan 3 dual 301 200 085 E 2403
3.4 Using the Main Menu
The instrument comes with a capacitive display. To select the items on the screen you can tap
with the finger on the display. Alternatively, you can use a pen (sold separately). The pen should
have a size of min. 6 mm in order to work on the display. For each main function a separate
icon is available.
1 2
3
4
5
1 Quick check
Take a fast measurement using the de-
fault parameters.
2 Measure
Take measurements. Results are saved
automatically.
3 Browse
View and delete measurement data.
4 Configuration
Change measurement parameters or
instrument settings.
5 Organizer
Appears after downloading at least one organizer from “smart-chart”.
Additional Symbols
On the top additional symbols are displaying the current system status:
• WiFi: A wireless connection can be used in addition to the default USB connection.
• Time: Current system time, see Configuration > Date / Time > Set time.
• Power: Current charge level of battery pack in the device.