To Next Page

To Previous Page

9 | Appendix BYK-Gardner GmbH

62 wave-scan 3 / wave-scan 3 dual 301 200 085 E 2403

9.3 System Messages

Measurement errors are indicated by type. Confirm with button Operate.

Acceleration

The instrument was accelerated too fast across the sample, or the scan direction was changed

too fast. Repeat the measurement.

Scan length

The required scan length has not been reached completely. Repeat until a short audio confirma-

tion is heard. Small areas can be measured by moving the instrument back and forth.

Speed

You have moved the measurement unit too quickly or unevenly over the sample. Repeat the

measurement.

Other manuals for BYK wave-scan 3

Questions and Answers:

Need help?

Do you have a question about the BYK wave-scan 3 and is the answer not in the manual?

General