BYK wave-scan 3 User Manual

BYK-Gardner GmbH Configuration | 8
301 200 085 E 2403 wave-scan 3 / wave-scan 3 dual 55
8.4 Display Time
You can configure the time interval for the automatic shutdown of your instrument.
Following values are possible (in minutes): 1, 2, 5, 10, 15, 30.
8.5 Checking Tiles
To document the correct measurement status of your instrument, you can save the checking
tiles in the system memory. Select the option Add to standard list.
The option Add to standard list is active if the checking tile has not been added yet. To delete
these entries from memory, use the function Browse Measurements [}41] > Standards.
Now you can use the function Standard Measurements [}29] to check the tolerances. Details
see Testing the Instrument [}24].

BYK wave-scan 3 Specifications

General

Brand	BYK
Model	wave-scan 3
Category	Measuring Instruments
Language	English