BYK wave-scan 3 - Appendix and Support Resources; Application Hints and Cleaning Instructions

To Next Page

To Previous Page

BYK-Gardner GmbH Appendix | 9

301 200 085 E 2403 wave-scan 3 / wave-scan 3 dual 59

9 Appendix

9.1 Application Hints

This section lists the common measurement tasks and the recommended procedure.

Single Measurements

For occasional sample-measurements:

• Take readings, see chapter Quick Measurements [}25].

• Transfer results directly to “smart-chart”.

Regular Test series

Here test sequence / identification can be standardized - e.g., batch control:

• Take readings, see chapter Standard Measurements [}29].

• Transfer results directly to “smart-chart”.

Objects with several Test Zones

Here test sequence / identification can be standardized - e.g., automobile or add-on parts:

• Create an organizer in “smart-chart”.

• Transfer organizer to the instrument.

• Take readings, see chapter Organizer Measurements [}37].

• Transfer results to “smart-chart” and store in database.

• Perform data analysis in “smart-chart”.

Occasional Test Series

Here test sequence / identification cannot be standardized - e.g., projects:

• Generate new measurement configuration.

• Take readings, see chapter Standard Measurements [}29].

• Transfer results directly to “smart-chart”.

Other manuals for BYK wave-scan 3