To Next Page

To Previous Page

BYK-Gardner GmbH Quick Measurements | 4

301 200 085 E 2403 wave-scan 3 / wave-scan 3 dual 25

4 Quick Measurements

With this function you can easily perform one or more measurements. For example: You can

measure a standard and a sample probe and compare the results manually. Make sure the pa-

rameters are set, see Measurement Parameters [}47].

4.1 Measuring

Click on icon Quick check. The measuring screen is displayed; showing the first sample to be

measured.

The instrument is ready to measure.

4.2 Initial Menu

At this state the context menu contains the single option End test series.

Via this option you can go back to the main menu. This is also possible vio the icon Back in the

upper left.

Other manuals for BYK wave-scan 3

Questions and Answers:

Need help?

Do you have a question about the BYK wave-scan 3 and is the answer not in the manual?

General