C-COR.net FlexNet E7 - Page 81

Rev F Specifications A-5
A
E73CLxNA4Cxxx 33dB 4/30 — 14.5 12 7.5 5 — 47.5 44 38.5 34 17@40 17 — —— — 35 35 E73CLxNA5C 33dB 4/30 — 14.5 12 7.5 5 — 47.5 44 38.5 35 17@40 17 — — — 37 37 E73CJxNA5Cxxx 33dB 4/30 — 14.5 12 7.5 5 — 47.5 44 38.5 35 17@42 17 — — 37 — 37 E73CN-NA4C8xx 33dB 4/30 — 14.5 12 7.5 5 — 47.5 44 38.5 35 26@65 26 — 44@
65
——44
E73CQPNA5C9Kx 33dB 4/30 — 14.5 11.5 7.5 5.5@70 — 47.5 44 38.5 35.5@70 17@55 17 — 37 — — 55 E75DJRL05F2xx 32dB 15.5/17.5 14 14 14 — 14 46 45 43 — 34 17@42 17 — — 36.5 — 36.5 E77DJ-NAxE6Dx 35dB 8/28 14.5 13 12 11 6.5 49.5 47.5 46 44 35 17@42 17 — — 37 — 37
1. Refer to the specification sheet for more information about the specific line extender in question. 2. Internal cable equalization (dB of cable loss) is at highest frequency; add 1 dB for EQ + value of PAD. 3. The outputs reflect unadjusted system tilts. System personnel should consider their system tilt to arrive at actual outputs. 4. @ 54MHz unless shown otherwise in the 54MHz column. 5. See also E729B-NA4A1. 6. See also E729L-NA5E1.
Table A.4 FlexNet
®
700 Series Line Extender Inputs and Outputs (cont’d)
1
Model Information Forward Return
Oper. Gain
@ max MHz
Internal Cable Equalization
2
/
Flat loss
Minimum Inputs
(dBmV)
Outputs
3
(dBmV)
Minimum
Inputs
(dBmV)
Outputs
(dBmV)
MHz MHz MHz MHz
Model Number 862 750 550 250 54
4
862 750 550 250 54
4
Various 5 70 55 42 40 5