CAB EOS User Manual

12
13
13
2.5 Switching on the Device
When all connections have been
made:
 Switch the printer on at the
power switch (1).
The printer performs a system
test, and then shows the system
status Ready in the display.
If an error occurs during the system
test, the symbol
, Critical
fault and type of error are
displayed.
1
Fig. 8 Power Switch
2 Installation

CAB EOS Specifications

General

Power Supply	100-240V AC, 50/60 Hz
Print Method	Thermal transfer
Print Width	Up to 105.6 mm (depending on model)
Interfaces	USB, Serial, Ethernet
Display	LCD
Supported Barcodes	Code 39, Code 128, UPC-A, UPC-E, EAN-8, EAN-13, Interleaved 2 of 5, Data Matrix, QR Code
Supported Operating Systems	Windows
Resolution	203 dpi
Media Width	4.33" (110 mm)