CAB SQUIX Series User Manual

26 26
6.1.9 Errors
 Start menu.
 Select Setup > Errors.
Parameter Meaning Default
Error-Reprint
On: With a correctable error and corresponding troubleshooting, the label
being printed when the error occurs is repeated.
If an error occurs in the mode Backfeed=smart
aftertherstlabelparthas
been printed, the label cannot be repeated.
Off: Print job is continued with the next label.
On
Syntax error Printer switches to error mode after receipt of an incorrect command. On
Barcode error
On:
Withfaultybarcodecontentsorsizespecications,printingis
interrupted.
Off: Printing is not interrupted if an error occurs. If barcode contents
are faulty, the printer attempts to replace the incorrect data with valid
characters(e.g.zeros).Ifbarcodesizespecicationsarefaulty,agray
area is printed instead of the barcode.
On
Network error Printer switches to error mode when problems with the network
connection occur.
Off
Table 15 Parameters of the Setup > Errors menu
6.1.10 Region
 Start menu.
 Select Setup > Region.
Parameter Meaning Default
Language Setting the display language English
Country Settingthecountry-specicdateandtimeformats.
The time formats can also be overwritten via software. The changes are
not saved permanently, however.
Germany
Keyboard Setting of the keyboard layout when using an external keyboard or the
soft keyboard on the printer display.
Automatic
(=Country)
Table 16 Parameters of the Setup > Region menu
6.1.11 Time
 Start menu.
 Select Setup > Time.
Parameter Meaning Default
Date Setting of the system date in the format DD.MM.YYYY.
The print output of the date occurs in the format set via the Country
parameter.
The date can also be changed via software. The change is not saved
permanently, however.
-
6 Conguration

CAB SQUIX Series Specifications

General

Peeler	Optional
Print Technology	Thermal transfer
Connectivity	USB, Ethernet
Display	LCD
Sensors	Label gap sensor
Print Resolution	300 dpi