Arrows that flash rapidly when signaling for
a
turn or
lane change may be caused by a burned-out signal bulb.
Other drivers won’t see
the
turn
signal.
Replace burned-out bulbs
to
help avoid possible
accidents. Check the fuse
(see
“Fuses and Circuit
Breakers”
in
the
Index) and for burned-out bulbs
if
the arrow fails
to
work when signaling a turn.
Headlamp
High/Low
Beam Changer
Pull
the
turn
signal lever
all the way toward
you
and
then release it
to
change the
headlamps from low beam
to
high or from high beam
to
low.
This light
on
the instrument panel will be
on,
indicating
high beam usage.
Flash-To-Pass
This lets
you
use the high-beam headlamps to signal
the driver in front
of
you that you want to pass.
Pull the
turn
signal lever toward
you
to
use. When
you
do:
0
0
0
If
the headlamps are either
off
or in the Daytime
Running Lamps
(DRL)
mode, the high-beam
headlamps will turn
on.
They’ll stay
on
as long
as you hold the lever there. Release the lever to
turn
them off.
If the headlamps are
on
low beam, they will shift
to
high beam and stay there. Pull the lever toward
you
to return to low beam.
If the headlamps are
on
high beam,
they
will switch
to low beam.
To
return to high beam. pull
the
lever
toward you.
2-33
To Next Page
Loading...
