Ventilation Tips
0
Keep the hood and front air inlet free of ice, snow or
any other obstruction (such as leaves).
The
heater
and defroster will work far better, reducing the
chance of fogging the inside
of
the
windows.
0
When
you
enter a vehicle in cold weather, adjust the
fan to the highest speed for a few moments before
driving off. This helps clear the intake outlets of
snow and moisture, and reduces the chance of
fogging the inside
of
the windows.
0
Keep
the air path under the front seats clear
of
objects.
This
helps circulate
air
throughout your vehicle.
Defrosting
Use DEFROST to remove fog
or
ice from the windshield
quickly
in
extremely humid or cold conditions.
Press the DEFROST button. If you select DEFROST,
adjust the fan speed by pressing the fan button up or
down.
If
you select DEFROST from
AUTO,
the system
will control the fan speed. The temperature also needs to
be adjusted by turning the TEMP/AUTO knob.
Note that recirculation
is
not available in the defrost
or
defog modes.
Rear
Window
Defogger
The lines
you
see
on
the
rear window warm the
glass. Press this button
to
turn
on
the rear defogger.
With it, the rear window
and both outside rearview
mirrors are heated.
The
system will automatically shut off after
10
minutes.
If
further defogging is desired, press the button again.
Do
not attach a temporary vehicle license, tape or decals
across the defogger grid on the rear window.
NOTICE:
~~~ ~
Don’t use
a
razor blade or something else sharp
on
the inside
of
the rear window.
If
you
do, you
could cut
or
damage the warming grid or the
integrated rear window antenna, and the repairs
wouldn’t be covered by your warranty.
3-8
To Next Page
Loading...
