CD
Adapter
Kits
It is possible
to
use a
CD
adapter kit with your cassette
tape player after activating the bypass feature on your
tape player.
To activate the bypass feature, use the following steps:
0
Turn
the
ignition
to
RUN
or ACCESSORY.
Turn the radio off.
Press and hold the
SOURCE
button for two seconds.
The tape symbol on the display will flash three
times, indicating the feature is active.
0
Insert the adapter.
This override routine will remain active until EJECT
is pressed.
Radio Personalization
(If
Equipped)
If
your vehicle is equipped with the
AM-FM
Stereo with
Cassette Tape Player and
1
(H
or
A)
or
2
(H
or A)
appears in the display when the radio
is
first turned
on,
your vehicle is equipped with this feature.
If
your
vehicle is equipped with any other audio system and
DRIVER
1
(HOME or AWAY) PRESETS or DRIVER
2
(HOME
or AWAY)
PRESETS
appears
in
the display
when
the
radio is first turned
on,
your vehicle is
equipped with
this
feature.
With this feature, your vehcle will recall the latest radio
settings as adjusted the last time your vehicle was
operated. This feature allows two different drivers
to
store and recall their own radio settings. The settings
recalled by the radio are determined by which
RKE
transmitter
(“1”
or
“2”)
was used to enter the vehicle.
The number
on
the back
of
the
RKE
transmitter
corresponds to driver
1
or to driver
2.
The radio settings
will automatically adjust
to
where they were last
set
by
the identified driver. The settings can also be recalled by
briefly pressing the memory seat buttons
1
or
2
located
on the driver’s door.
Your radio can store home and away presets. Home and
away presets allow you
to
use one set of preset radio
settings
in
the area where you live, and another set when
you
go
out
of
town. That way,
you
will not need to
reprogram your presets every time you travel. With the
radio off and the clock displayed, use
FF
and
RW
to
select home or away presets.
To
select the away presets,
press and hold
FF
for five counts until you hear
a
beep.
The next time the radio comes on, the away presets will
be active.
To
select the home presets, press and hold RW
for five counts until you hear a beep. The next time the
radio comes
on,
the home presets will be active.
3-32
To Next Page
Loading...
