RDM:
Press this button to hear
the
tracks in random.
rather than sequential, order. RANDOM will appear
on
the display. Press TUNE-SEEK while RDM is
on
the display to randomly seek through discs and tracks.
Press
RDM
again
to
turn
off random play. (This button
is not available
on
the AM-FM Stereo with Cassette
Tape Player.)
SIDE:
Press this button
to
select the next disc in the
changer. If your vehicle is equipped with the AM-FM
Stereo with Cassette Tape P1aye.r. CD and
the
disc
number will appear
on
the display each time you press
this button. If
your
vehicle
is
equipped with any other
audio system, DISC LOADING will appear
on
the
display and the disc number on the radio display will
go
to
that of the next available CD each time you press
this button.
SOURCE:
Press this button
to
select a source. The
audio source must be loaded
to
play. If none
of
the audio
sources are loaded,
NO
SOURCE LOADED will appear
on
the display. Press this button again or
BAND
to
switch back to the radio. (CD will be displayed for a
few seconds instead
on
the
AM-FM
Stereo with Cassette
Tape Player, then the radio will play.)
EJECT
Slide the CD changer door all the way open
and the disc holder will automatically eject.
Compact Disc Changer Errors
CD CHANGER ERROR could be displayed for
the following:
0
The road is too rough.
The
disc should play when the
road is smoother.
0
The
disc
is
dirty. scratched, wet or loaded label
side up.
0
The air is very humid. If
so,
wait about an hour and
try again.
CD CHANGER DOOR OPEN
is
displayed when the
CD changer door is left open. (CHEK DOOR will be
displayed instead on the
AM-FM
Stereo with Cassette
Tape Player.) Completely
close
the changer door to
restore normal operation.
If
any error occurs repeatedly or if an error cannot be
corrected, please contact your dealer.
3-31
To Next Page
Loading...
