Whenever a
CD
magazine with discs is loaded in
the
changer, the CD changer symbol will appear on the
radio display. If the
CD
changer is checking the
magazine for
CDs,
the
CD
symbol will flash
on
the
display until the changer is ready to play. When
a
CD
begins playing, a disc and track number will be
displayed. The disc numbers are listed
on
the front of
the magazine.
All
of
the CD functions are controlled by the radio
buttons, except for ejecting the CD magazine.
PUSHBUTTONS:
Press buttons one through six
to
select
compact
discs one through six. Press and hold
one
of
the six pushbuttons until a beep sounds
to
select
compact discs
7
through
12.
These pushbuttons
represent the order
of
the discs loaded in the changer.
DSPL:
Press and hold this button
to
see the track
elapsed time (available on the AM-FM Stereo with
Cassette Tape Player
only).
REV/RW
Press and hold this button
to
reverse quickly
through a track selection.
FF:
Press
and hold this button to advance quickly
through a track selection.
If
your vehicle is equipped with the AM-FM Stereo with
Cassette Tape Player, use SEEK-TUNE. For all other
audio systems, use TUNE-SEEK.
SEEK-TUNE:
Press the right arrow to seek
to
the next
selection. Press the left arrow to search for the previous
track selection. The sound will mute while seeking.
TUNE-SEEK:
When this button
is
pressed, it has two
positions. This button works the same, whether it is
pressed to
the
first or second position. Press this
button to seek to the next or previous selection on
the
compact disc.
SCAN:
Press this button. You will hear the first few
seconds for the first track on each disc. Press this button
again
to
stop
scanning. (This button is available on the
AM-FM Stereo with Cassette Player only.)
TRACK SCAN:
Press SCAN for less than two seconds.
You will hear the first-few seconds
of
each track on a
disc. Press SCAN again
to
stop TRACK
SCAN.
The CD
will mute while scanning and SCAN will appear on the
display. (This function
is
not
available
on
the AM-FM
Stereo with Cassette Tape Player.)
DISC
SCAN:
When
you
press SCAN for more than two
seconds,
you
will hear the first few seconds
of
the first
track
on
each disc. Press
SCAN
again to stop DISC
SCAN. The
CD
will mute while scanning and
SCAN
will appear on the display. (This function is
not
available
on the
AM-FM
Stereo with Cassette Tape Player.)
To Next Page
Loading...
