Power
Door
Locks
Press the power door lock switch to lock or unlock both
doors at once.
Automatic
Door
Locks
Close your
doors
and turn
on
the ignition. Every time
you
move the shift lever
out
of PARK
(P),
both of
the
doors will lock.
The
doors will unlock every time you
stop the vehicle and move the shift lever into PARK
(P).
If someone needs
to
get out while your vehicle is not in
PARK
(P),
have that person use
the
manual or power
lock. When the door
is
closed again, it will not lock
automatically.
Use
the manual or power lock to lock the
door again. If
you
need
to
lock the doors before shifting
out
of
PARK
(P),
use
the manual
or
power lock button
to lock the doors.
Programmable Automatic
Door
Locks
(If
Equipped)
With the ignition in
RUN,
the
door locks can be
programmed through prompts displayed by the
Driver Information Center
(DIC).
These prompts
allow the driver
to
choose various lock settings. For
programming information, see “Programmable, Memory
and Personalization Features” later in this section.
Anti-Lockout Feature
Leaving your key in any ignition position with either
door open will disable the use
of
the power door lock
switches as well as the lock button on the remote keyless
entry
transmitter. If you close
the
doors, you can lock
them using the remote keyless entry transmitter. It is
always recommended that
you
remove your ignition
key when locking your vehicle.
Note that the anti-lockout feature can be overridden
by
holding
the
driver’s power door lock switch for three
seconds or longer.
2-5
To Next Page
Loading...
