Electronic
Solar
Sensor
The sensor monitors the sun’s solar radiation and
is
located
on
top
of the instrument panel near the
windshield. The
ECC
panel uses this information
to
automatically make the necessary temperature and
airflow adjustments to maintain your comfort.
Air
Conditioning
On hot days, open the windows long enough
to
let
hot
inside air escape. This reduces
the
time
it
takes for your
vehicle to
cool
down. Then keep your windows closed
for the air conditioner
to
work its best.
Press the AC button or the
TEMP/AUTO
knob
to turn
the system on and then select the proper
MODE
to direct
airflow. The system will cool and dehumidify the air
inside the vehicle. Also while
in
the AUTO mode, the
system will use recirculation as necessary to cool the air.
You
may
also
need to adjust the interior temperature and
the fan speed as needed.
When
the
air conditioner
is
on,
you
may sometimes
notice slight changes
in
your vehicle’s engine speed
and power. This
is
normal because the system
is
designed to cycle the compressor
on
and off to keep the
desired temperature.
Heating
Press the
MODE
buttdn
to
select heater. Adjust the
interior temperature to a comfortable level and if the fan
speed needs adjusting, press the up or down arrow.
Outside air will be brought in and sent through the floor,
air conditioning or bi-level outlets (depending on
the
condition). The heater works best if
you
keep your
windows closed while using
it.
3-6
To Next Page
Loading...
