4.
Press the
COMPASS
button
on
the bottom
of
the
mirror until the new zone number appears
in
the
display. After you stop pressing the button, the
display will
show
a
“C”
in the direction display
within
a
few
seconds. (This
is
the automatic
calibration mode
--
you’ll need
to
drive
in
a
circle to calibrate the mirror. See “Compass
Calibration” following.)
Compass
Calibration
If
the letter
“C”
appears in
the
compass display,
the
mirror may need calibration.
The mirror can be calibrated
in
one of two
ways:
Drive the vehicle
in
circles at
5
mph
(8
km/hj
or less
until
the display reads
a
direction, or
Drive the vehicle
on
your everyday routine.
Power
Remote
Control Mirror
(Heated)
Your vehicle has an electric
mirror control located
on
the driver‘s door armrest.
Move the switch
in
the middle
of
the control to choose
the right or left mirror.
To
adjust the mirror, push the
arrow control
in
the direction
you
want the mirror to
go.
Adjust each mirror
so
you
can see the side
of
your
vehicle and the area behind your vehicle.
The
mirrors
can
also
be programmed for personalization
if
you
have the optional memory package. For
more
information, see “Memory Seat and Mirrors”
in
the Index.
2-47
To Next Page
Loading...
