To
operate, press the INFO button
to
display TIMER.
Each
of
the fields for the hours, minutes and seconds are
two numeric digits.
Once TIMER OFF
0O:OO:OO
is displayed, press the
INFO RESET button to start the timing feature. Press
the INFO RESET button again to stop it. If
you
will be
starting and stopping your vehicle
--
during a trip for
instance
--
the TIMER feature will automatically start
timing where it left off when
you
last stopped.
To
reset
it, press and hold the INFO RESET button until the
display reads TIMER
0O:OO:OO.
Press the INFO button
to exit from the TIMER function.
OIL LIFE LEFT
(Reset):
Press the
INFO
button to
display the OIL LIFE LEFT, then press and hold the
INFO RESET button until 100% OIL LIFE LEFT is
displayed. (This only needs
to
be reset after you have
had the oil changed.)
ENGLISHAWETRIC
(Reset):
Press the INFO button to
display ENGLISWMETRIC RESET, then press the
INFO RESET button to select. The display will change
from English (miles) to metric (kilometers).
INFO:
Pressing this button repeatedly will display the
RANGE, MPG AVG,
MPG
INST, GAL FUEL USED,
MPH, AVG MPH, TIMER, BATTERY VOLTS,
COOLANT TEMP, OIL LIFE LEFT and
ENGLISWMETRIC RESET.
FUEL
DOOR:
Press this button to open the fuel
door. (This feature will work
only
when the shift lever
is in PARK
(P)
regardless of whether or not the vehicle
is running.)
TRUNK:
Press this button to open
the
trunk. (This
feature will work only when the shift lever
is
in
PARK (P) regardless
of
whether
or
not the vehicle
is running.)
DIC
Messages
These messages will appear if there
is
a problem sensed
in one
of
your vehicle’s systems. Vehicles that are first
sold
in
Canada will have a number after each message.
This number helps
to
identify the message which is only
displayed in English.
APPLY
BRAKE
TO SHIFT
-
46:
This message will
appear if your vehicle is in PARK
(P)
for about
15
seconds and the brake is not pressed. To remove this
message from the Driver Information Center (DIC)
display, hold the
OFF
and the blue (cooler) buttons on
the digital cluster control panel for about five seconds.
On the analog climate control panel, press the
OFF
button (next to the MODE button) and the down arrow
on
the
PASS TEMP button for about five seconds. Hold
the same two buttons
to
display
the
message again.
2-7
1
To Next Page
Loading...
