Climate Control Personalization
With this feature, your vehicle will recall the latest
climate control settings as adjusted
the
last time your
vehicle was operated. This feature allows two different
drivers
to
store and recall their own climate control
settings. The settings recalled by the climate control
system are determined by which remote keyless entry
transmitter
(“1”
or
“2”)
was used
to
enter the vehicle.
The number
on
the back
of
the remote keyless entry
transmitter corresponds
to
driver
1
or
to
driver
2.
After
the unlock button is pressed on the remote keyless entry
transmitter
or
the ignition key is placed in the ignition,
the climate control settings will automatically adjust to
where they were last
set.
The settings can also
be
changed by briefly pressing the memory seat
buttons
1
or
2
located on the driver’s door.
Radio
Personalization
With this feature, your vehicle will recall the latest radio
settings as adjusted the last time your vehicle was
operated. This feature allows two different drivers
to
store and recall their own radio settings for AM and
FM
presets, last tuned station, volume, tone and audio
source (radio, cassette
or
CD). The settings recalled
by
the
radio are determined by which remote keyless
entry transmitter
(1
or
2)
was used to enter the vehicle.
The number
on
the back
of
the remote keyless entry
transmitter corresponds to driver
1
or
to driver
2.
After
the unlock button is pressed
on
the remote keyless entry
transmitter and the ignition
is
in
RUN,
the
radio settings
will automatically adjust to where they were last set
by
the identified driver. The settings can also be changed by
briefly pressing the memory seat buttons
1
or
2
located
on the driver’s door. The new settings will be saved for
the driver.
Continuous Variable
--
Road
Sensing
Suspension
(CV-RSS)
(ETC
Only)
The
CV-RSS
automatically adjusts the ride
of
your
vehicle. Automatic ride control is achieved through a
computer used
to
control and monitor
the
suspension
system. The controller receives input from various
sensors
to
determine the proper system response.
If
the
controller detects
a
problem within the system, the
Driver Information Center
(DIC)
will display
a
SERVICE RIDE
CONTROL message.
If
this message
appears, have your vehicle serviced at your dealership.
2-84
To Next Page
Loading...
