6.
Check
that
the
jumper
cables
don't have loose
or
missing insulation.
If
they
do,
you
could
get
a
shock.
The vehicles could also be damaged.
Before you connect the cables, here are some basic
things
you
should know. Positive
(+)
will go
to
positive
(+)
and negative
(-)
will
go
to
an
unpainted
metal engine part
or
a
body metal surface. Don't
connect positive
(+)
to negative
(-)
or
you
will get a
short that would damage the battery and maybe other
parts, too. Also, don't connect negative
(-)
to
negative
(-).
I
A
CAUTION:
7.
Connect the red positive
(+)
cable to the positive
(+>
Fans or other moving engine parts can injure
you
badly.
Keep your hands away
from
moving parts
terminal
of
the vehicle with the dead battery.
once
the
engine is running.
5-6
To Next Page
Loading...
