4.
Raise the vehicle
by
turning the jack handle
to
the
right. Raise
the
vehicle far enough
off
the
ground
for
the spare tire to fit
under
the vehicle.
5.
Remove all wheel nuts and take off the flat tire.
6.
Remove any
rust
or
dirt
from the wheel bolts,
mounting surfaces and
spare wheel.
I
A
CAUTION:
Rust
or
dirt on the wheel, or
on
the parts to
which it is fastened, can make the wheel nuts
become loose after
a
time. The wheel could come
off and cause
an
accident. When you change
a
wheel, remove any rust or dirt from the places
where the wheel attaches to the vehicle. In an
emergency, you can use a cloth
or
a
paper towel
to do this; but be sure
to
use
a
scraper
or
wire
brush later,
if
you
need to, to get all the rust or
dirt off.
5-30
To Next Page
Loading...
