Shoulder Belt Tightness Adjustment
Your car
has
a shoulder belt tightness adjustment
feature.
If
the shoulder belt seems
too
tight, adjust it
before you begin to drive.
1.
Sit well back in the seat.
2.
Start pulling
the
shoulder belt
out.
A
A
A
A
3.
Just before
it
reaches the end, give
it
a
quick pull.
4.
Let the belt
go
back
all
the
way.
You
should
hear
a
slight
clicking
sound.
If
you
don't, the adjustment
feature
won't
set, and
you'll
have
to
start
again.
c
A
5.
Now
you
can add a
small
amount
of slack. Lean
forward slightly, then sit back.
If
you've added more
than
1
inch
(25
mm)
of
slack, pull the shoulder belt
out
as
you
did before and start again.
If
you
move around in the vehicle enough, pull out the
shoulder
belt.
or
open your
door,
the
belt
will
become
tight again.
If
this happens,
you
can reset it.
1-14
To Next Page
Loading...
