If
the belt stops before
it
reaches the buckle. tilt the
latch plate and keep pulling until
you
can buckle it.
Pull
up
on
the latch plate to make sure it
is
secure.
If
the belt is not long enough, see “Safety Belt
Extender” at the end
of
this section. Make sure the
release button
on
the buckle
is
positioned
so
you
would be able to unbuckle the safety belt quickly
if
you ever had to.
3.
To
make the lap
part
tight, pull down on the buckle
end
of
the belt as
you
pull up on the shoulder part.
1-27