The square key is for the
ignition only. It has a
resistor pellet
which
is
part
of
the vehicle's
PASS-Key@II system.
The oval key is for the
doors and ail other locks.
When a
new
vehicle
is
delivered, the dealer removes the
plug from the door key. The plug has
a
code
on
it that
tells the dealer
or
a
qualified locksmith
how
to
make
extra keys. The ignition key
has
a bar code tag attached
to it rather than a knock
out
plug. Your dealer or
qualified locksmith can make extra ignition keys by
reading the bar code tag.
There are
15
alternative ignition PASS-Key
I1
blanks to
help discourage theft. Keep the bar code tag and the
door key plugs in
a
safe place.
If
you lose your keys,
you will be able to have new ones made using the plug
or bar code tag.
I
NOTICE:
~ ~~
Your vehicle has a number
of
new features
that can help prevent theft. You can have
a
lot
of
trouble getting into your vehicle if you
ever lock your keys inside and you may have
to
damage your vehicle to get in. Be sure you have
extra keys.
2-3
To Next Page
Loading...
