Setup
16 ©2021 CAE 905K720652 v1.0
CAESimEquip
CAE SimEquip Transport Ventilator
The Transport Ventilator includes:
• Transport Bag
• Breathing Circuit with Non-invasive Mask or Endotracheal Tube
• Filter
• O
2
Hose
• SpO
2
Probe
• EtCO
2
Sample Line
Transport Ventilator Unassembled
The Transport Ventilator uses a breathing circuit. To assemble the breathing circuit:
1. Connect plastic cuffs to the end of each breathing circuit limb.
2. Connect one of the limbs to the wye connector (at the y).
3. Connect the opposite limb to the wye connector (at the opposite side of the y).
4. Connect the elbow to the wye connector (at the top of the y).
5. Connect the T-connector to the elbow.
To Next Page
Loading...
