©2021 CAE 905K720652 v1.0 43
Setup
CAE SimEquip Anesthesia
Medical hoses for the Anesthesia Machine may connect in the front or back of the Medical Cart,
depending upon the type of hose. Connect the hoses as desired for the intended simulation.
WARNING: Never attach the hoses to a real gas source. The medical hoses included with SimEquip
are intended for simulation purposes only.
Anesthesia Machine - Front Panel
Anesthesia Medical Attachments
Type Location
Ventilator Breathing Circuit Front
Filter Front
NIBP Cuff Hose Front
EtCO
2
Sample Line Front
SpO
2
Probe Front
Temperature Sensor Front
ECG Cable (3 Lead) Front
IBP Transducer Front
O
2
Hose Back
Medical Air Hose Back
Nitrous Oxide Hose Back
ECG
Cable
IBP
Transducer
SpO
2
NIBP
Breathing
Circuit
Limbs
Temperature
Sensor
EtCO
2
To Next Page
Loading...
