CalAmp Viper 100

APPENDIX B – REGULATORY CERTIFICATIONS
UL Certification
All models UL approved when powered with a listed Class 2 source.
This device is suitable for use in Class I, Division 2, Groups A, B, C, and D or non-hazardous
locations only.
Installation
This device is intended for installation only in a RESTRICTED ACCESS LOCATION per EN60950-
1:2006.
Domestic and International Certifications
Model Number
Frequency
Range
FCC
IC (DOC)
European Union
EN 300 113
Australia/New
Zealand
140-5018-500
140-5018-501
140-5018-502
140-5018-503
136 – 174 MHz
NP4-5018-500
773B-5018500
140-5018-600
140-5018-601
142 – 174 MHz
1588
ACMA AS/NZS 4925-
2004 (Spectrum
Impact Assessment)
140-5028-502
140-5028-503
215 – 240 MHz
NP4-5028-502
773B-5028502
140-5028-504
215 – 240 MHz
NP45028504
773B-5028504
140-5048-300
140-5048-301
140-5048-302
140-5048-303
406.1 - 470 MHz
NP4-5048-300
773B-5048300
140-5048-400
140-5048-401
406.1 - 470 MHz
1588
ACMA AS/NZS 4925-
2004 (Spectrum
Impact Assessment)
140-5048-500
140-5048-501
140-5048-502
140-5048-503
450 - 512 MHz
NP4-5048-300
773B-5048300
140-5048-600
140-5048-601
450 - 512 MHz
1588
ACMA AS/NZS 4925-
2004 (Spectrum
Impact Assessment)
140-5098-304
880 - 902 MHz
NP45098304
773B-5098304
140-5098-500
140-5098-501
140-5098-502
140-5098-503
928 - 960 MHz
NP4-5098-500
773B-5098500
140-5098-504
928 - 960 MHz
NP45098504
773B-5098504