Calculated Industries 4088 - Appendix B: Default Settings; Stored Values Defaults; Preference Settings Defaults

64 — Machinist calc
®
Pro 2
APPENDIX B – DEFAULT SETTINGS
g*), your calculator will return to the
following settings:
STORED VALUES DEFAULT VALUE
Material None
Process Face Milling
Tool High Speed Steel Tool
Number Of Teeth 1
Drill Cut Angle 118°
Weight per Volume
490 Pounds Per
Cubic Foot
% Thread Grip 75%
Thread Classication
U.S. Threads Internal 2B
Metric Threads Internal 6H
If you replace your batteries or perform a Full Reset* (turn calculator
off, hold down * and press O) your calculator will return to the
following settings (in addition to those listed above):
PREFERENCE SETTINGS DEFAULT VALUE
Default Unit Format Mode U.S. Mode
Fractional Resolution 1/64"
Functional Result Rounding 0.0000
Area Answer Format Standard
Volume Answer Format Standard
Fractional Mode Standard
Mathematical Operation Order of Operations
* Depressing the Reset button located above the d key will also
perform a Full Reset.